Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 103 (kliknij aby zobaczyć)
FAN Motor Error
A fault occurred in the fan motor.
Check the fan motor for proper
connection and for any presence of foreign matter in the fan. (See 6.5.2-5.) Replace the fan motor or the Main Control PCB. See 6.5.2-4.
Fuser Error
A fault occurred in the fusing unit. (Time-out error, etc.) Thermistor Open A fault occurred in the Check Error fusing unit. (Thermistor open check error) Thermistor Short A fault occurred in the Check Error fusing unit. (Thermistor short check error) SSIO Interface Error Power supply board SSIO I/F error Second Tray Time-out I/F time-out occurred Error between the Main Control Board and the 2nd Tray. Multipurpose Feeder I/F time-out occurred Time-out Error between the Main Control Board and the multi feeder. Watch Dog Time-out A watch dog time-out Error occurred.
See 6.5.2-4.
See 6.5.2-4.
Replace the power supply board or the Main Control PCB. Check the 2nd tray for proper connection.
Check the multi feeder for proper connection.
Turn the power off, then back
on to recover from the error. Replace the Main Control PCB. When replacing the Main Control PCB, upload/download the EEPROM data. (Refer to 4.3.1-4.) Check the cover to release the error display. If the display does not change after this procedure, replace the power supply board. Check the paper in the cassette. Open and then close the cover. When the cover is closed, recovery printing is carried out and the error display is released. If this error occurs frequently, see 6.5.2 2-1.
Cover Open
Cover Open
The upper cover was opened.
Jam errors
Paper Input Jam
A jam occurred during paper hopping from the tray being displayed. Tray: Tray1, Tray2, Feeder
